…and work and turn again. And then flip. Work and turn is a press process where both sides of a sheet are printed using one plate or make-ready. In this case, I’m using this method to avoid handling tiny pieces of paper.
Work and Turn
Tin Can Tips#paper
Tags for anything about paper, that stuff where we put our printing.
A Pretty Good Straight Edge
Tin Can Tips
My Challenge guillotine paper cutter is only capable of taking widths up to 25 inches wide. Since most of my parent sheets come in 26″ x 40″, I always have to make at least one cut on the table ( sometimes two ).
You must be logged in to post a comment.